Skip to Content
Call Us Today! 817-587-0080
Top

Summer Pool Drain Safety

|

Safe pool drains

According to Safe Kids USA, 33 children died from suction drains between 1985 and 2004. One hundred more children were injured. Suction entrapment occurs when a swimmer, usually a small child, is trapped by the suction forces created by the water rushing out of the drain at the bottom of the pool. In 2004, the death of Virginia Graeme Baker, former Secretary of State’s granddaughter, brought the dangers of pool suction entrapment to light in the Federal arena. Her drowning while being held at the bottom of a hot tub has led to new Federal standards. On December 19, 2008 the new US Federal Law, Virginia Graeme Baker Pool and Spa Safety Act, went into effect. Maintaining your swimming pool can sometimes involve replacing the main pool drain and the drain cover. Replacing the main drain in your pool can be complex and it can sometimes be difficult. It can be simpler and safer to leave the replacement of the main drain to the experts at plumbing of Forth Worth. Replacing the main pool cover can be done in a day. Follow the simple rules to replacing the cover to help you get the job done.

Plumbing Pro Tips to Share:

Tip #1 You will want to replace your old main drain cover with a version which meets new government guidelines. These devices are known as anti-entrapment covers, as they help to prevent fingers and hair from becoming trapped under the drain. Any drain cover which is being used as a replacement has to meet the ASME National Standard.

Tip #2  Consider how deep your pool is, and whether you feel comfortable diving to that level in order to replace the drain cover. If you have previous experience of diving in this type of condition, then you should get your scuba-diving gear on, and go to the bottom of the pool. If you are not sure about your ability to manage, then call a professional and have them perform the switch for you. Leave the water into the pool as removal might cause damage.

Tip #3   Turn off your filtration system, and make sure that there is no suction in the drain. With the new cover in your hand, dive to the bottom of the pool. You will need to unscrew the old drain, and pocket the screws. Place the old drain to one side, and slot the new drain cover into the main pool drain. Your new drain should be sized sufficiently to fit into the drain hole. Place it into the middle of the drain area, and let it go to correctly position it without the cover becoming trapped in the vortex. Tip #4  Your drain cover will come with a series of instructions from the manufacturer, which will give details of how to properly connect the cover to the drain, and any screws or nails that should be used to keep the cover in place. Read these instructions carefully before you begin the dive, and then follow them closely. They are the best guide to how to position the new drain, and you ignore them at your own risk.

Image courtesy of jaysi / 123RF Stock Photo

Categories: 
Share To: